NJN Bearing is a professional bearing manufacturer of small ball and roller bearings.，deep groove ball bearing ，pillow block bearing，taper roller bearing, custom bearing...

Bearing No.	BD		OD		Width		Radius		Basic load ratings(kN)		Ball Complement		Maxronout Speed		Weight
Bearing No.	mm	inch	mm	inch	mm	inch	mm	inch	Cr	Cor	No	Size	Grease	Oil	Kg
606	6	0.2362	17	0.6693	6	0.2362	0.3	0.012	1.95	0.72	6	3.969	30000	38000	0.006
607	7	0.2756	19	0.748	6	0.2362	0.3	0.012	2.88	1.08	6	3.969	28000	36000	0.006
608	8	0.3149	22	0.8661	7	0.2756	0.3	0.012	3.32	1.38	7	3.969	26000	34000	0.008
609	9	0.3543	24	0.9449	7	0.2756	0.3	0.012	3.35	1.4	7	3.969	22000	30000	0.012
624	4	0.1574	13	0.5118	5	0.1968	0.2	0.007	1.15	0.4	6	2.381	36000	45000	0.0032
625	5	0.1968	16	0.6299	5	0.1968	0.3	0.012	1.88	0.68	6	3.175	32000	40000	0.0084
626	6	0.2362	19	0.748	6	0.2362	0.3	0.012	2.8	1.05	6	3.969	28000	36000	0.0081
627	7	0.2756	22	0.8661	7	0.2756	0.3	0.012	3.28	1.35	7	3.696	26000	34000	0.013
628	8	0.3149	24	0.9448	8	0.3149	0.3	0.012	3.35	1.4	7	3.969	24000	32000	0.017
629	9	0.3543	26	1.0236	8	0.3149	0.3	0.012	4.45	1.95	7	4.763	22000	30000	0.02
6000	10	0.3937	26	1.0236	8	0.315	0.3	0.012	4.55	1.95	7	4.763	29000	34000	0.019
6001	12	0.4724	28	1.1024	8	0.315	0.3	0.012	5.1	2.39	8	4.763	26000	30000	0.021
6002	15	0.5906	32	1.2598	9	0.3543	0.3	0.012	5.6	2.84	9	4.763	22000	26000	0.035
6003	17	0.6639	35	1.378	10	0.3937	0.3	0.012	6.8	3.35	10	4.763	20000	24000	0.04
6004	20	0.7874	42	1.6535	12	0.4724	0.6	0.024	9.4	5.05	9	6.35	18000	21000	0.068
6005	25	0.9843	47	1.8504	12	0.4724	0.6	0.024	10.1	5.85	10	6.35	15000	18000	0.079
6006	30	1.1811	55	2.1654	13	0.5118	1	0.039	13.2	8.3	11	7.144	13000	15000	0.113
6007	35	1.3779	62	2.4409	14	0.5512	1	0.039	16	10.3	11	7.938	12000	14000	0.149
6008	40	1.5748	68	2.6772	15	0.5906	1	0.039	16.8	11.5	12	7.938	10000	12000	0.185
6009	45	1.7716	75	2.9528	16	0.6299	1	0.039	21	15.1	12	8.731	9200	11000	0.231
6010	50	1.965	80	3.1496	16	0.6299	1.1	0.043	21.8	16.6	13	8.731	8400	9800	0.256
6011	55	2.1653	90	3.5433	18	0.7087	1.1	0.043	28.3	21.2	12	11	7700	9000	0.388
6012	60	2.362	95	3.7402	18	0.7087	1.1	0.043	29.5	23.2	13	11	7000	8300	0.414
6013	65	2.559	100	3.937	18	0.7087	1.1	0.043	30.5	25.2	13	11.112	6500	7700	0.421
6014	70	2.7559	110	4.3307	20	0.7874	1.1	0.043	38	31	13	12.303	6100	7100	0.604
6015	75	2.9528	115	4.5276	20	0.7874	1.1	0.043	39.5	33.5	14	12.303	5700	6700	0.649
6016	80	3.1496	125	4.9213	22	0.8661	1.1	0.043	47.5	40	14	13.494	5300	6200	0.854
6017	85	3.5433	130	5.5118	22	0.8661	1.1	0.043	49.5	43	14	14	5000	5900	0.89
6018	90	3.5433	140	5.5118	24	0.9449	1.5	0.059	58	49.5	14	15.081	4700	5600	1.02
6019	95	3.7402	145	5.7078	24	0.9449	1.5	0.059	60.5	54	14	15.081	4500	5300	1.08

Single row deep groove ball bearings are particularly versatile. They are simple in design,non-separable, suitable for high and even very high speeds and are robust in operation, requiring little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads, even at high speeds.

Single row deep groove ball bearings are the most widely used bearing type. Consequently, they are available in many executions and sizes:

◎ open basic design bearings
◎ sealed bearings
◎ ICOSTM oil sealed bearing units
◎ bearings with snap ring groove, with or without snap ring

Single row

Connect Socially

Get in Touch